How to fix odor from my Kero-Sun LC-43G Heater?
If you notice an odor from your Kero-Sun Heater, it could be due to a few reasons. The air filter might be clogged, so try cleaning it. Kerosene might have spilled, so wipe off any spills from the fuel sub tank, removable fuel tank, and drip tray. Also, the use of inferior kerosene could be the reason, so remove the fuel and refuel using fresh, water-clear kerosene.
What to do if my Kero-Sun LC-43G Heater is extinguished after ignition?
If your Kero-Sun Heater extinguishes after ignition, several factors could be the cause. First, the room temperature might be too high, so allow the room to cool. Second, there might be an oxygen shortage, so open doors and windows to ventilate the room. Third, the tip-over switch may have been activated, in which case you should reignite the heater. Fourth, there might be water in the fuel, so remove the fuel and refuel using fresh, water-clear kerosene. Fifth, the heater may be out of fuel, so refuel it. Finally, the high limit switch might be activated, so clean the circulation fan cover and remove any obstructions.
Why is my Kero-Sun Heater not igniting?
If your Kero-Sun Heater is not igniting, several factors could be the cause. It may be out of fuel, so refuel it. The air filter might be clogged, so clean it. The use of inferior kerosene could be the reason, so remove the fuel and refuel using fresh, clear kerosene.
How to troubleshoot if the power lamp fails to turn on in my Kero-Sun LC-43G?
If the power lamp on your Kero-Sun Heater fails to turn on, the power plug might be disconnected. Plug it into a 230V AC outlet.
What causes poor or noisy combustion in a Kero-Sun LC-43G Heater?
Poor or noisy combustion in your Kero-Sun Heater can be caused by a clogged air filter, so clean the air filter.
Identifies the various parts and controls of the heater.
Explains the function of various indicator lamps and digital displays on the operation panel.
Details the required clearances from walls and level floor placement.
Step-by-step guide on how to safely refuel the heater with kerosene.
Instructions on how to set the current time on the heater's clock.
Steps to ignite the heater and what to expect during the process.
How to set a specific time for the heater to automatically start.
How to set and adjust the desired room temperature.
Explains how to activate and use the energy-saving mode.
How to enable and disable the child safety lock feature.
Explains ventilation and fuel level warning indicators.
Details the automatic burner cleaning cycle and safety shutoff.
Instructions on how to properly turn off the heater manually.
Lists and explains various error codes displayed by the heater.
Instructions for cleaning the air filter.
Instructions for cleaning the heater's fan cover.
How to clean the fuel acceptance fitting.
How to check for and clean fuel leaks.
Guide on wiping louvers to remove dust and stains.
A chart to determine causes and solutions for common operational issues.
Procedures for draining fuel, cleaning, and storing the heater.
Details model specifications, origin, and electronic waste disposal guidelines.
General| Model | LC-43G |
|---|---|
| Heater Type | Kerosene |
| Fuel Tank Capacity | 9.5 liters |
| Burn Time | 12 - 17 hours |
| Ignition | Manual |
To Next Page
