Kessel Ecolift XL User Manual (English)

Other manuals for Kessel Ecolift XL

Instructions For Installation, Operation And Maintenance264 pages

Questions and Answers:

B
Brian Collier Jr.Sep 8, 2025
What to do if Kessel Ecolift XL shows 'Relay fault 1 or 2'?
- B
  Brian BrownSep 8, 2025
  If your Kessel Water Pump displays a 'Relay fault 1 or 2', it means the power contactor does not switch off. Disconnect the control unit from the mains and replace the contactor.
K
Kendra JamesAug 23, 2025
Why does my Kessel Water Pump show a 'Phase fault'?
- G
  George SmithAug 23, 2025
  A 'Phase fault' in your Kessel Water Pump indicates that phase L1, L2, or L3 is not available. Check the power supply cable and fuses to ensure they are functioning correctly.
R
Richard AustinAug 25, 2025
How to fix a 'Battery fault (extension flap)' on a Kessel Ecolift XL?
- E
  Elizabeth BlackAug 26, 2025
  If your Kessel Water Pump shows a 'Battery fault (extension flap)', it indicates that the battery is either missing, faulty, or its voltage is less than 15.5V. Check the battery connection and replace the battery if needed.
D
David HarmonAug 27, 2025
What causes a 'Motor fault (extension flap)' in a Kessel Water Pump and how to fix it?
- M
  miranda33Aug 27, 2025
  A 'Motor fault (extension flap)' in your Kessel Water Pump suggests a cable break or a faulty motor. Disconnect the system from the power supply and deactivate the battery. Check the cable for a correct connection and passage. Inspect the motor for proper function and replace it if necessary.
S
Steven MezaAug 27, 2025
What to do if my Kessel Water Pump displays 'FKA flap fault'?
- M
  Mark HarrisAug 28, 2025
  A 'FKA flap fault' in your Kessel Water Pump means the redundant valve cannot be closed completely, likely because the flap is blocked. Disconnect the mains plug and the battery on the control unit for Ecolift XL redundant valve. Open the flap cover, remove the blockage, and then put the system back into operation.
M
Molly WangAug 29, 2025
How to resolve a 'Rotary field fault' in a Kessel Ecolift XL?
- H
  Harry EspinozaAug 29, 2025
  A 'Rotary field fault' in your Kessel Water Pump indicates an incorrect rotary field for the mains connection. Swap two phases of the power cable to correct this.
S
stephanie96Sep 13, 2025
How to troubleshoot a battery fault in Kessel Plumbing Product extension flap?
- R
  reesepaulSep 14, 2025
  To address a battery fault in the extension flap of your Kessel Plumbing Product, check the battery connection. If necessary, replace the battery, referring to the control unit instructions for guidance.
A
allenkatherineSep 9, 2025
What to do if the Kessel Plumbing Product FKA flap is blocked?
- M
  Michael PhillipsSep 9, 2025
  If the Kessel Plumbing Product's redundant valve flap is blocked, first disconnect the mains plug and the battery from the control unit for the Ecolift XL redundant valve. Open the flap cover, remove the blockage, and then put the system back into operation.
B
bryan33Sep 6, 2025
Why am I experiencing 'Pressure loss' with my Kessel Ecolift XL?
- G
  Gary WilliamsSep 7, 2025
  A 'Pressure loss' in your Kessel Water Pump suggests a leak in the hose on the screw fitting to the immersion pipe (or plunger) or the control unit. Check the airtightness of the pressure sensor system.
X
xgomezSep 4, 2025
What to do if Kessel Ecolift XL Water Pump shows 'Power outage (extension flap)'?
- J
  Justin KingSep 4, 2025
  If your Kessel Water Pump experiences a 'Power outage (extension flap)', it means the voltage supply is interrupted and battery operation is in progress. Reconnect the pump to the mains supply.