Keurig B150 Series - User Manual

P/N 60-201142-000 Rev A 10/09
B150 Series Commercial Brewer
Direct Plumb Kit
Welcome Keurig Authorized Dealer!
This manual provides:
• Installation of the Direct Plumb Kit (DPK) that allows you to connect your
customer’s B150 brewer to municipal or independently pumped water supply.
• Maintenance Mode diagnostics that will provide you with system information and
tools so that you can fully diagnose any problems at the customer’s site.
• Instructions on how to descale the brewer in the event of problems associated
with hard water.

Summary

B150 Series Commercial Brewer Direct Plumb Kit

B150 Direct Plumb Unit Installation Instructions

Disconnect and Drain Brewer

Disconnect brewer from AC power and drain the Hot Water Tank as detailed.

Make Electrical Connection

Connect to Power and Water Supply

Filter Requirements

Water Filtration System Requirement

Keurig B150 requires a water filtration system for optimal flavor and reliability.

Filter Installation Steps

Important Notice: Warranty

Failure to use a water filter invalidates the brewer warranty.

Descaling Instructions for B150 Brewer with DPK

Descaling Preparation Steps

Steps to prepare the brewer for descaling solution addition.

De-Scaling Procedure: Fill and Clean

De-Scaling Procedure: Brew Cycle

De-Scaling Procedure: Rinse Cycles

Draining Procedure for Hot Water Tank and DPK CWT

Draining Procedure Notice

Warning about hot water release during draining, to be performed by trained personnel.

Draining Tank Contents

Keurig B150 Series Specifications