Keurig B200 User Manual

KEURIG
Keurig B200 Mid-Size Office Brewer
Key Features
LED Water Tank Level
Indicator -
Shows cold water tank level in
pour over mode. Level will always show
"full" when unit is in plumbed mode.
In Pour Over Mode
Cold water reservoir
can be easily filled,
holds 64oz. and includes
removable filter screen.
You get continuous back-to-
back brews every 60 seconds
until tank is empty.
Digital User Interface
KEURIG*
BREWED
KEURIG
Brew
Buttons
Serve as two cup size selections
for end users, 8oz. (top) and 6oz.
Allow KAD to toggle and select
LCD menu options when menu
button at back of brewer is
activated.
Fill Door
Allows easy pouring access to fill
cold water tank. Brewer will beep
and water level indicator will
completely illuminate when cold
water tank is full.
In Direct Water Line
Plumbed Mode
Easily connects to existing
water line or bottled water
supply with an in-line water
filter. This allows unlimited
back-to-back brewing every
60 seconds.
Panel Access Door
Remove door to access
menu button, switches
and breaker. -
Panel Access Screw
Power Switch
Power Cord
Filter Mounting Screws
Easily attach a water filter
to back of unit.
Water Tank Drain Tubes
Red drains the hot water tank.
Blue drains the cold water tank.
Water Plumbing Inlet
Designed to accept 3 A"
garden hose fitting for
plumbed-in mode.
cULus Commercial
16 INCHES HIGH x 10.25 INCHES WIDE x 18 INCHES DEEP 24 POUNDS (EMPTY)
Call: 1 888 CUP BREW (888 287 2739)
KEURIG. INCORPORATED

Keurig B200 Specifications

General

Brand	Keurig
Model	B200
Category	Coffee Maker
Language	English

Summary

Keurig B200 Brewer Key Features

Water Tank Indicators and Access

Details LED water level indicator, fill door, drain tubes, and plumbing inlet for water supply.

Brewing Modes and Capabilities

Explains Pour Over mode and Direct Water Line Plumbed mode for continuous brewing.

User Interface and Controls

Covers brew buttons, digital interface, panel access, power switch, and cord.

Quick Start Guide: Setup and Operation

Pour Over Operation Steps

Step-by-step instructions for setting up and operating the brewer in Pour Over mode.

Plumbed Operation Steps

Step-by-step instructions for setting up and operating the brewer in Plumbed mode.

Prime and Brew Process

Instructions for priming the brewer and performing the initial brews.

Basic LCD User Message Setup

Guide for configuring LCD messaging options like language and service phone number.