MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
8
SeCtIon 4 Set-up & Operation
Plug the Brewer into its own
grounded outlet. If the electric circuit
is overloaded with other appliances,
your Brewer may not function
properly. The Brewer should be
operated on its own circuit, separate
from other appliances.
Before making your first beverage,
perform an initial cleansing brew.
Follow these steps, skipping
numbers 9 and 10. The initial
cleansing brew is performed
without a K-Cup
®
portion pack.
Press the Power Button found on
the front of the Brewer.
The Add Water Indicator will
flash blue. Lift the Cold Water
Reservoir Lid to open.
2
3
4
1
Before
you
Brew
Initial Cleansing & First Brew
To Next Page
Loading...
