Heat Up
The brewer will automatically fill the internal hot
water tank with water and then the water will be
heated. This will take about three minutes. During
the heating period, “Brewer is heating” will be
displayed on the touch screen.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod
holder. To avoid injury, do not lift the handle during the brewing process.
Power On
Turn the brewer on. The power switch is located
at the bottom left-hand side of the brewer on
the back. The brewer’s touch screen will display
“Please connect the brewer to a water source to
initiate filling”.
1
2
Before You Brew
To Next Page
Loading...
