EasyManua.ls Logo

Keurig K15 User Manual

Keurig K15
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FAQ & User Guide
How hot is the water in the K15 Coffee Maker?
The optimal temperature for brewing beverages in your Keurig K-Cup coffee maker is
192° F. This is the internal temperature of the water in your brewer. However, once your
beverage is brewed, the dispensed temperature can vary greatly. In-cup temperature
depends on the temperature of the cup and material it is made from. When brewing into
an insulated container, such as a foam or paper cup, 180-185°F in-cup temperature is
typically attained. In addition, dispensing into a cold ceramic mug will cool the beverage
significantly.
How much water do I add at a time to the K15 Coffee Maker?
Any amount between 6-10 ounces but no more than 10 ounces.
How do I descale the K15 Coffee Maker?
Before you begin, you will need a large ceramic mug, fresh water, descale solution and
access to a sink. Do not use a paper cup. STEP 1: FIRST DESCALING SOLUTION
RINSE
• Turn on your brewer.
• Pour one third (4.6 oz.) of the Keurig
Descaling Solution into the cold Water
Reservoir then add fresh water to the 10 oz. fill level.
• Place a large ceramic mug on the Drip Tray Plate. Do not use a paper cup.
• Lift the Handle but do not add a K-Cup
®
pod. After 5 seconds, lower Handle and press
the BREW button.
• Once solution is dispensed, discard hot contents into sink.
STEP 2: SECOND DESCALING SOLUTION RINSE
• Repeat above process up until you press the BREW button.
• When BREW button turns solid red, power off as it starts to dispense.
• Let brewer stand for at least 30 minutes.
• Power on the brewer, lift and lower Handle, then press BREW button.
• Discard the hot contents into sink.
STEP 3: FRESH WATER RINSE
• Repeat Step 1 (3 times) – using 10 oz. of fresh water each time.
• You may need to perform additional Fresh Water Rinse cycles if you notice any
residual taste.
How do I fix a short cup?
If your brewer is not brewing the full amount selected, it may be caused by the following:
• The exit needle is clogged by coffee grounds or cocoa mix. Please refer to page 23 of
your user guide for cleaning instructions. (Download user guide below)
• The brewer may need to be descaled. Please refer to the descaling instructions.

Other manuals for Keurig K15

Question and Answer IconNeed help?

Do you have a question about the Keurig K15 and is the answer not in the manual?

Keurig K15 Specifications

General IconGeneral
BrandKeurig
ModelK15
CategoryCoffee Maker
LanguageEnglish

Summary

K15 Coffee Maker Water Temperature

K15 Coffee Maker Water Amount

How to Descale the K15 Coffee Maker

First Descaling Solution Rinse

First step of descaling process using solution and one rinse cycle.

Second Descaling Solution Rinse

Second step involves a rinse cycle, waiting period, and a final brew.

Fresh Water Rinse

Final step involves multiple fresh water rinses to remove residue.

Troubleshooting Short Cups

Related product manuals