Need help?Do you have a question about the Kewtech KTD40 and is the answer not in the manual?
General| Type | Multifunction Tester |
|---|---|
| Display | Digital |
| Insulation Test Voltages | 250V, 500V, 1000V |
| RCD Trip Current | 10mA, 30mA, 100mA, 300mA, 500mA |
| RCD Trip Time | 0 - 2000ms |
| Power Supply | 6 x 1.5V AA batteries |
| IP Rating | IP54 |
| Measurement Functions | Voltage, Current, Resistance, Continuity, Insulation, Loop Impedance, RCD |
| Resistance Measurement Range | 0 - 1999Ω |
| Continuity Range | 0 - 1999Ω |
| Insulation Resistance Range | 0 - 1999MΩ |
| Loop Impedance Range | 0.01Ω-1999Ω |
| PSC Range | 0 - 1999A |
| Dimensions | 200 x 100 x 50mm |
| Weight | 500g |
Critical safety instructions for using the tester.
Illustrates correct wiring configuration for polarity testing.
Illustrates incorrect wiring configuration and potential dangers.
Describes the two types of connecting leads for the tester.
Details how to configure test leads for no-trip loop tests.
Details the tester's wiring test capabilities and error detection.
Outlines parameters and accuracy for loop testing.
Specifies the measurement ranges and their associated accuracy.
States the maximum voltage the tester can withstand.
Details the power requirements and battery performance.
Lists operating and storage conditions for the tester.
To Next Page
