Keychron B1 Pro - Page 16

16
SWITCH BLUETOOTH DEVICES
Short press key combinaon “fn” + “1” / “fn” + “2” / “fn” + “3” to switch to other device.
1. Switch the toggle to the Cable opon (it only works when a USB cable is plugged in).
2. Connect our cable with your PC and keyboard.
*Under Wired Mode, keyboard will not enter into Baery Saver Mode.
WIRED MODE:
RECONNECT:
1. Switch the keyboard to the Bluetooth opon to acvate the keyboard.
2. The Bluetooth indicator flashes for 3 seconds and automacally pairs with the last paired device.
3. If the Bluetooth indicator is off, press any key to enter the reconnecon mode again.
* The keyboard must have been paired with the device to perform this funcon.
TURN OFF THE KEYBOARD
Switch the keyboard to the Cable(Off) opon and unplug the power cable.