Keychron K5 - Manage Bluetooth Devices; Battery Saver and Backlighting Control; Operating System Configuration

11
Switch Bluetooth devices
Short press combination key “fn” + “1” / “fn” + “2” / “fn” + “3” to switch to another device.
Reconnect:
1. Switch the keyboard to the Bluetooth option to activate the keyboard (the
keyboard will connect to the last connected device by default).
2. The Bluetooth indicator flashes for 4 seconds and automatically pairs with the
last paired device.
3. If the Bluetooth indicator is off, press any button to enter the connection again.
*The keyboard must have been paired with the device to perform this function.
Turn off the keyboard
Switch to “Off”
Battery Saver
Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10
minutes. Tap any button to wake the keyboard. If want to disable this auto battery save
mode, press fn+S+O for 4 seconds. Then if want to enter this power save mode again,
press fn+S+O+ for 4 seconds.
Backlit Setting
• Short press to switch between different types of lighting effects.
• When backlit is on, press button to switch among them. Short press fn and
“left arrow” or fn and “right arrow” adjust light colors. (For RGB version only)
OS Switch
1-MAC/iOS
Turn the switch to Mac/iOS when you are connected to a Mac or iOS operating system.
2-Windows/Android
Switch the toggle to Windows/Android when the keyboard is connected to a Windows or
Android operating system.
*When using the Windows/Android mode, keys are used for “Windows” and “Alt”
functions.