13
Function Description
Charging
Plug the cable into a USB port and plug the other end into the keyboard port. Charging
Indicator: When battery is below 15%, a red battery blinking indicator will be triggered. A
red light will stay on while charging; Fully charged in around 3 hours, a green battery
indicator will appear.
*The Keychron keyboard is compatible with all USB ports. Please use a 5V 1A adapter or
USB 3.0 for the best performance. The Keychron K6 can be charged in Bluetooth/on/off
mode.
** This product supports up to 5V charging voltage and 1A charging current. We are not
responsible for any problems caused by improper charging.
Bluetooth / Wired Mode (Toggle Switch)
1. Switch the toggle switch to Cable option (it only works when a USB cable is
plugged in).
2. Connect our cable with your pc and keyboard.
3. Backlit will be turned on.
*Under Wired Mode, Keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
1. Switch the keyboard to Bluetooth option.
2. Backlit will be turned on.
3. Hold "Fn+1" key for 4 seconds to activate Bluetooth pairing (the Bluetooth
indicator fast flashes for 3 minutes to detect pairing.
4. Search for the Bluetooth device "Keychron K6" on your device and connect it (the
Bluetooth indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via combination
key “fn1” + “Q” / “fn1” + “W” / “fn” + “E”. Simply shor press the combination keys “fn1 +
“W” / “fn1” + “E”
*The Bluetooth indicator will continue to flash for 3 minutes.
To Next Page
Loading...
