21
Switching Between Bluetooth Devices
To easily switch between Bluetooth devices, you can use the keyboard’s multi-device pairing feature.
After pairing your Keychron K8 Max with multiple devices (up to three), you can seamlessly toggle
between them:
• Use the key combinations "fn" + "1", "fn" + "2", or "fn" + "3" to switch to a specific paired
device.
• Press the respective combination briefly, and the keyboard will automatically reconnect to
the selected device if it is within range and Bluetooth is active.
This feature allows you to manage multiple devices efficiently, such as a computer, tablet, and
smartphone, without the need for repeated pairing.
Reconnecting To A Previously Paired Device
If you need to reconnect to a device the keyboard was previously paired with:
• Ensure that the keyboard is set to Bluetooth mode by toggling the switch.
• The keyboard’s Bluetooth indicator will flash for 3 seconds after being activated. During this
time, it will automatically search for and connect to the most recently paired device.
• If the Bluetooth indicator stops flashing and no connection is established, press any key to
force the keyboard to reattempt the connection.
Please note: For this reconnection process to work, the keyboard must have been successfully paired
with the device beforehand. Ensure that the device's Bluetooth is turned on and ready to connect.
Using The Keyboard In Wired Mode
For those who prefer a wired connection or need to conserve battery, the Keychron K8 Max can
easily function in wired mode. To enable this mode:
• Slide the toggle switch to the Cable option to activate wired mode.
• Connect the supplied cable securely to both your keyboard and your PC or compatible
device.
• Upon establishing the connection, the keyboard’s backlighting will turn on to indicate that it
is now operating in wired mode.
• In wired mode, the keyboard bypasses its internal battery and does not enter Battery Saver
Mode, ensuring uninterrupted operation for extended periods.
To Next Page
Loading...
