Keychron Q1 - Post-Flashing VIA Pairing; Troubleshooting VIA Connection; Obtaining VIA JSON File

If VIA can’t pair with your Keychron Q1 after you tried flashing, you need to
follow these steps:
1. Reconnect your keyboard power cable.
2. If VIA still doesn’t pair together after you reconnect the power cable, download
the Keychron Q1 JSON file.
Keychron Q1
Download Q1 ANSI JSON File
Download Q1 ISO JSON File
Keychron Q1 Version 2
Download Q1 V2 ANSI Knob Version JSON File
Download Q1 V2 ANSI Non Knob Version JSON File