9 Watch TheBuildingTutorialOnOurWebsite
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
10
Factory Reset
0
—ojgggggjqggg•—
Troubleshooting? Don't know what's going on with the keyboard?
@Try factory resetby pressingfnl + J + Z (for 4 seconds).
@ Download the right firmware for your keyboardfrom our website.
Remove the power cable from the keyboard.
@ Removethe spacebar keycapto find the reset button onthe PCB.
@ Hold the reset key while pluggingin the powercableand then
release the reset key. The keyboard now will enter DFU mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory resetthe keyboardagainby pressingfnl + J+ Z (for 4 seconds).
* Step by step guide can be found on our website.
9
To Next Page
Loading...
