Need help?Do you have a question about the Keyestudio KS0078 and is the answer not in the manual?
Introduces basic Arduino communication and the 'Hello World' experiment with hardware requirements.
Explains how to blink an LED using a digital pin, detailing hardware and circuit connection.
Introduces Pulse Width Modulation (PWM) with diagrams and basic concepts.
Demonstrates input functionality by controlling an LED with a button press.
Introduces photoresistors for light sensing and controlling LED brightness.
Details the 1602 LCD module and its main parameters for displaying text and data.
Introduces servomotor control, explaining its working principle and connection.
General| Microcontroller | ATmega328P |
|---|---|
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 32 KB (ATmega328P) of which 0.5 KB used by bootloader |
| SRAM | 2 KB (ATmega328P) |
| EEPROM | 1 KB (ATmega328P) |
| Clock Speed | 16 MHz |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 25 g |
To Next Page
