Need help?Do you have a question about the Keyestudio EASY PLUG Ultimate Starter Kit and is the answer not in the manual?
General| Microcontroller | ATmega328P |
|---|---|
| Connectivity | USB |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| Clock Speed | 16 MHz |
| LED_BUILTIN | 13 |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 25 g |
| Flash Memory | 32 KB (of which 0.5 KB used by bootloader) |
| SRAM | 2 KB |
| EEPROM | 1 KB |
Details the five main parts of the Mixly interface: selection, code edit, text code, system function, and message prompt.
Steps to import necessary libraries into the Mixly software for project execution.
Guides on opening and running the first Mixly project, 'Hello World'.
Simple project to display 'Hello World!' via serial communication between the EASY Plug board and PC.
Demonstrates lighting up, blinking, breathing, and brightness control of LEDs.
Details the EASY plug Obstacle Avoidance Sensor for detecting obstacles.
Details the EASY plug Servo Module for connecting micro servos.
Controls servo motor rotation to specific angles via serial input.
Controls servo motor to rotate back and forth at a specific angle.
To Next Page
