Keyestudio EASY PLUG Ultimate Starter Kit - Project 15: Ambient Light

www.keyestudio.com
179
Project 15: Ambient Light
Overview
This project we will test the ambient light. You can use analog reading to
read the data from this sensor.
Component Required:
 EASY plug control board*1
 EASY plug TEMT6000 Light Sensor *1
 EASY plug LED module *1
 EASY plug RGB module *1
 RJ11 cable *2
 USB cable*1
Component Introduction:
EASY plug TEMT6000 Ambient Light
Sensor
Light sensors are probably one of the most
common sensors in life. They can be found
in your laptop, phone or home lighting
system.
A light sensor measures the level of light in a
room or ambient light in a space.
This EASY plug TEMT6000 light sensor uses a special ambient light detector
(TEMT6000) with spectral response that closely emulates the human eye.
It does react well to very small changes in a wide range of brightness,
however, it does not react well to IR or UV light.
The sensor can help you to to detect the light density.