Keyestudio EASY PLUG Ultimate Starter Kit - 4 Installing Arduino Software

62
4.Installing Arduino Software
When you get the control board, first you should install the Arduino software
and driver. We usually use the software Arduino 1.5.6 version.
You can download it from the link below:
https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x
Or you can browse the ARDUINO website to download the latest version from
this link, https://www.arduino.cc, pop up the following interface.
Then click the SOFTWARE on the browse bar, you will have two options
ONLINE TOOLS and DOWNLOADS.