Always keep a fire extinguisher nearby while welding.
Use welding blankets to protect painted and or flammable surfaces; rubber weather-
stripping, dash boards, engines, etc.
Ensure power supply has properly rated wiring to handle power usage.
ELECTROMAGNETIC FIELDS CAN BE A HEALTH HAZARD!
The electromagnetic field that is generated during arc welding may interfere with
various electrical and electronic devices such as cardiac pacemakers. Anyone using
such devices should consult with their physician prior to performing any electric
welding operations.
Exposure to electromagnetic fields while welding may have other health effects which
are not known.
WARNING
ARC RAYS CAN INJURE EYES AND BURN!
Arc rays produce intense ultraviolet radiation which can burn exposed skin and cause
eye damage. Use a shield with the proper filter (a minimum of #11) to protect your
eyes from sparks and the rays of the arc when welding or when observing open arc
welding (see ANSI Z49.1 and Z87.1 for safety standards).
Use suitable clothing made from durable flame-resistant material to protect your skin.
If other persons or pets are in the area of welding, use welding screens to protect
bystanders from sparks and arc rays.
WARNING
FUMES AND WELDING GASES CAN BE A HEALTH HAZARD!
Fumes and gasses released during welding are hazardous. Do not breathe fumes that
are produced by the welding operation. Wear an OSHA-approved respirator when
welding.
Always work in a properly ventilated area.
Never weld coated materials including but not limited to: cadmium plated, galvanized,
lead based paints.
WARNING
HOT METAL AND TOOLS WILL BURN!!
Electric welding heats metal and tools to temperatures that will cause severe burns!
Use protective, heat resistant gloves and clothing when using KEYGREE or any other
welding equipment. Never touch welded work surface, torch tip or nozzle until they
have completely cooled.
CAUTION
FLYING METAL CHIPS CAN CAUSE INJURY!
Grinding and sanding will eject metal chips, dust, debris and sparks at high velocity. To
prevent eye injury wear approved safety glasses.
Wear an OSHA-approved respirator when grinding or sanding.
Read all manuals included with specific grinders, sanders or other power tools used
before and after the welding process. Be aware of all power tool safety warnings.
CAUTION
Page 04
To Next Page
