Keysight Technologies 34461A - User Manual

ADMINISTRATIVE INFORMATION
ACTION X ON SPECIFIED FAILURE
CATEGORY: [[]] AGREEABLE TIME
STANDARDS
LABOR: 1 Hour
LOCATION [[]] CUSTOMER INSTALLABLE
CATEGORY: [[]] ON-SITE (active On-site contract required)
X SERVICE CENTER
[[]] CHANNEL PARTNERS
SERVICE: X RETURN
INVENTORY: [[]] SCRAP
[[]] SEE TEXT
USED [[]] RETURN
PARTS: [[]] SCRAP
[[]] SEE TEXT
AVAILABILITY: PRODUCT’S SUPPORT LIFE
NO CHARGE AVAILABLE UNTIL: 17 April 2019
X Calibration Required
[[]] Calibration NOT Required
PRODUCT LINE: GM
AUTHOR: WY
ADDITIONAL INFORMATION:
© Keysight Technologies 2015-2018
Modification Recommended Service Note
Version 1.2 | April 17, 2018| Page 1 of 2
Modification Recommended
Service Note
34461A-05
34461A Digital Multimeter, 6½ Digit
Serial Numbers: MY50000000-MY57210900
The Problem – Keysight 34460A/34461A/34465A/34470A Digital Multimeter with firmware version
below “FW 2.17” may experience ACV out of specification.
Parts Required:
NONE
Supersedes:
NONE

Summary

The Problem

ACV Out of Specification

Digital Multimeters may experience ACV out of specification due to component U507 heating up during automated processes.

Parts Required

Administrative Information

Solution and Action

Service Center Repair Steps

Detailed procedures for service centers including verification, component replacement (U507), and calibration.

Revision History

Keysight Technologies 34461A Specifications

General

Model	34461A
Category	Multimeter
Manufacturer	Keysight Technologies
Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Frequency Range	3 Hz to 300 kHz
Interface	USB, LAN, GPIB
Weight	3.5 kg
Capacitance Range	1 nF to 10 mF
DC Current Range	100 μA to 10 A
AC Current Range	100 μA to 10 A
Frequency Accuracy	0.01% of reading
Display	4.3-inch LCD