Need help?Do you have a question about the Keysight Technologies 34923A and is the answer not in the manual?
General| Topology | Multiplexer |
|---|---|
| Relay Type | Electromechanical |
| Maximum Voltage | 300 V |
| Maximum Current | 1 A |
| Switch Type | Electromechanical relay |
| Maximum Switching Voltage | 300 V |
| Maximum Switching Current | 1 A |
| Maximum Switching Power | 30 W |
| Input Type | Analog |
| Connector Type | Screw terminal |
| Compatibility | Keysight 34980A, 34970A/34972A |
| Contact Resistance | < 100 mΩ initial |
| Isolation Resistance | >10 GΩ at 100 V |
| Operating Temperature Range | 0 to 55 °C |
| Measurement Types | Voltage, Current, Resistance |
| Communication Interface | GPIB |
Explains CAUTION and WARNING notices regarding operational hazards and potential damage.
SCPI commands for controlling channel states and querying status.
SCPI commands for configuring and executing measurements.
SCPI commands for module setup, identification, and system reset.
Details the 34922A module's architecture, banks, and analog buses.
Details the 34923A module, its banks, and configuration modes.
Details the 34924A module's features and capabilities.
Details the 34925A module, its FET switches, and operation.
To Next Page