Keysight Technologies B1500A Self-Paced Training Manual

Class Exercises
Class exercises use the test setup listed below. The test setup data are only examples and
included in the Demo.xpg file stored in Keysight B1500 Series Product Reference
CD-ROM.
NOTE Demo.xpg file
Demo.xpg file is required to create the Demo preset group which contains the test setup
data used by the class exercises. And it is stored in the \data folder on Keysight B1500
Series Product Reference CD-ROM.
The Demo preset group should be created before starting the class exercise. To create the
preset group, launch EasyEXPERT and import the file by using the Preset Group Import
dialog box opened by clicking My Favorite Setup > Preset Group > Import Preset Group.
The test setup data are only examples for the class exercises.
Module Exercise Device Test setup/definition/data Page
Module 1 no exercise
Module 2 Id-Vd measurement MOSFET IDVD, Id-Vd 2-7
Id-Vd measurement MOSFET Trace IdVd 2-10
Id-Vd measurement MOSFET Trace IdVd 2-16
SMU series connection 511 kohm IRVR 2-28
SMU parallel connection 1 ohm Parallel 2-32
SMU series resistor 511 kohm IV-res 2-37
Re measurement, kelvin connection Bipolar Tr REKELV 2-50
Module 3 Leak current measurement - Zero-check 3-9
Ultra low current measurement - Zero-check-ASU 3-19
Id-Vg measurement MOSFET IDVG 3-20
Gummel plot Bipolar Tr GUMMEL 3-25
Module 4 C-V sweep measurement MOSFET CV-1MHz 4-6
Module 5 Charge pumping MOSFET Charge Pumping 4T 0.1V
step
5-20
Flash memory MOSFET Demo-S-NorFlash
Endurance
5-29
ALWG output 511 kohm ALWG monitor 5-36

Keysight Technologies B1500A Specifications

General

Brand	Keysight Technologies
Model	B1500A
Category	Measuring Instruments
Language	English