17 | Keysight | PXI Vector Network Analyzer - Configuration Guide
www.keysight.com/find/pxivna
1. For a list of computers compatible with Keysight Technologies PXIe M9018A chassis, refer to Tested Computer Technical Note (literature no. 5990-7632EN).
Using a Non-Keysight Chassis
The M937xA can be successfully installed in a non-Keysight PXI chassis. Please use the following guidelines.
– Ensure that the chassis has an available PXIe or PXI-H slot which can be used by the M937xA.
– Ensure that the chassis and controller supports peer-to-peer PXI Express I/O switch topology.
– Ensure that controller selected is compatible with chassis.
Please contact your Keysight representative for more detailed information. For technical
assistance with non-Keysight equipment, please refer to the equipment manufacturer’s website.
PC Requirements for M937xA PXIe VNA Control
1
Windows 7 and Vista
Operating system Windows 7 (32 & 64 bit)
Windows Vista, SP 1 & 2 (32 & 64 bit)
Processor speed 1.5 GHz dual core (x86 or x64) minimum,
2.4 GHz recommended
Available memory 1 GB minimum
8 GB recommended
Available disk space 1.5 GB available hard disk space
Related Literature
For more detailed product and specification information refer to the following literature and web pages:
M937xA PXIe VNA, Data Sheet, M9370-90002
M937xA PXIe VNA, Startup Guide, M9370-90001
M937xA PXIe VNA, Brochure, 5992-0098EN
M937xA PXIe VNA, Flyer/Photo Card, 5991-4883EN
M9018A PXIe 18 slot Chassis, Data Sheet, 5990-6583EN
M9019A PXIe 18 slot Chassis, Data Sheet, 5992-1481EN
M9037A PXIe High Performance Embedded Controller, Data Sheet, 5991-3661EN
M9036A PXIe Embedded Controller, Data Sheet, 5990-8465EN
To Next Page
Loading...
Need help?
General
