Page 10
This information is subject to change without notice. © Keysight Technologies, 2018, Published in USA, September 19, 2018, 5992-3303EN
Find us at www.keysight.com
Learn more at: www.keysight.com
For more information on Keysight Technologies’ products, applications or services,
please contact your local Keysight office. The complete list is available at:
www.keysight.com/find/contactus
Using a Non-Keysight Chassis
The M9410A and M9411A VXT PXIe vector transceiver can be successfully installed in a
non-Keysight PXI chassis. Please use the following guidelines.
• Ensure that the chassis has enough consecutive PXIe or PXI-H slots to
accommodate the M9410A or M9411A.
• Ensure that the chassis and controller support peer-to-peer PXI Express I/O switch
topology.
• Ensure that controller selected is compatible with chassis.
Please contact your Keysight representative for more detailed information. For technical
assistance with non-Keysight equipment, please refer to the equipment manufacturer’s
website.
Related Literature
For more detailed product and specification information refer to the following literature
and web pages:
Publication title Publication number
M9018B and M9019A PXIe 18-slot chassis - Data Sheet 5992-1481EN
M9037A PXIe Embedded Controller - Data Sheet 5991-3661EN
X-Series Measurement Applications - Brochure 5989-8019EN
Simplify Signal Creation with Signal Studio Software -
Brochure
5989-6448EN
To Previous Page
