EasyManuals Logo

Keysight Technologies M9411A Configuration Guide

Keysight Technologies M9411A
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Page 9Find us at www.keysight.com
One day start-up assistance
A Keysight Technologies applications engineer will get you started quickly by helping
you install the modules in a chassis, configure the controller, load software and start
making measurements.
Calibration services
The modular products are factory calibrated and shipped with an ISO-9002, NIST-
traceable calibration certificate. A one year calibration cycle is recommended.
Upgrading Your System
Your product can be easily upgraded after the initial purchase. Fast license-key
upgrades for performance options that do not require additional hardware:
1. Contact your Keysight representative to place an order for an option upgrade.
2. You will receive your hardware entitlement certificate via email.
3. Redeem the certificate online by following the instructions provided to receive a
license key file.
4. Install the license key file using the Keysight License Manager.
5. Begin using the new capability
1, 2
.
Description Upgrade number (x = 0 or 1)
Bandwidth upgrade, 300 MHz to 600 MHz M941xAU-B6X
Bandwidth upgrade, 300 MHz to 1.2 GHz M941xAU-B12
Bandwidth upgrade, 600 MHz to 1.2 GHz M941xAU-BU1
Memory upgrade, 256 MSa to 512 MSa M941xAU-M05
Add high output power M941xAU-1EA
Add half duplex port M941xAU-HDX
Timing synchronization for MIMO M941xAU-MMO
Multi-tester synchronization across chassis M941xAU-MTS
Phase coherence M941xAU-PHC
1. At the time of manufacture, the hardware related to many of these options was fully adjusted and
the option performance was verified to be within its warranted specifications. Within one year of
the initial calibration date of the analyzer, this option is fully calibrated with no further adjustment
or verification testing.
2. If this transceiver has been adjusted as part of a repair or calibration during its first year, or if
the transceiver is more than one year old, additional adjustment and performance verification
tests are required to ensure that some newly installed options are functioning properly. However,
the completion of these tests does not guarantee that the transceiver meets all warranted
specifications.

Other manuals for Keysight Technologies M9411A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight Technologies M9411A and is the answer not in the manual?

Keysight Technologies M9411A Specifications

General IconGeneral
BrandKeysight Technologies
ModelM9411A
CategoryTransceiver
LanguageEnglish

Related product manuals