34
General Accessories
USB
– N4688A CD-ROM drive
Provides an external read/write CD-ROM drive with a USB cable.
– N4689A USB hub
Provides a USB hub for connecting additional USB peripherals.
Hard drive
– N8980A spare hard drive
For use with 500 MHz Pentium III CPU board
1
Recommended for use in secure environments.
– N8981A spare hard drive
For use with 1.1 GHz Pentium M CPU board
1
Recommended for use in secure environments.
Probe
– 85024A high-frequency probe
Provides high-impedance in-circuit test capability from 300 kHz to
3 GHz.
Power meters and sensors
1
Recommended for self support, adjustments and perfor-
mance tests to verify proper instrument operation.
– U2000A USB power sensor, 10 MHz to 18 GHz
– U2001A USB power sensor, 10 MHz to 6 GHz
– U2002A USB power sensor, 50 MHz to 24 GHz
– U2004A USB power sensor, 9 kHz to 6 GHz
– E4418B single-channel power meter
– E4419B dual-channel power meter
– 8481B power sensor, 10 MHz to 18 GHz, Type-N (m), 25 W
– 8481A power sensor, 10 MHz to 18 GHz, Type-N (m), 100 mW
– 8485A power sensor, 50 MHz to 26.5 GHz, APC-3.5 mm (m), 100 mW
– 8487A power sensor, 50 MHz to 50 GHz, 2.4 mm, 300 mW
– 8487D power sensor, 50 MHz to 50 GHz, 2.4 mm, 100 mW
– R8486A power sensor, 26 GHz to 40 GHz, waveguide flange
UG-599/U, 100 mW
– Q8486A power sensor, 33 GHz to 50 GHz, waveguide flange
UG-383/U, 100 mW
– U8486A power sensor, 50 GHz to 75 GHz, waveguide flange
UG-385/U, 200 mW avg
– E4412A CW power sensor, 10 MHz to 18 GHz, Type-N (m), 200 mW
– E4413A CW power sensor, 50 MHz to 26.5 GHz, 3.5 mm, 200 mW
Amplifiers
– 83006A power amplifier, 10 MHz to 26.5 GHz, 20 dB gain, power
out: +18 dBm to 10 GHz or +16 dBm to 20 GHz or +14 dBm to 26.5
GHz
– 83017A power amplifier, 50 MHz to 26.5 GHz, 25 dB gain, power
out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz
– 83018A power amplifier, 2 to 26.5 GHz, 27 dB gain to 20 GHz or
23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz or +21 dBm to
26.5 GHz
– 83020A power amplifier, 2 to 26.5 GHz, 30 dB gain to 20 GHz or
27 dB to 26.5 GHz, power out: +30 dBm to 20 GHz or +26 dBm to
26.5 GHz
– 83050A power amplifier, 2 to 50 GHz, 23 dB gain, power out:
+20 dBm to 40 GHz or +17 dBm to 50 GHz
– 83051A power amplifier, 45 MHz to 50 GHz, 23 dB gain power out:
+12 dBm to 45 GHz or +10 dBm to 50 GHz
Couplers
– 87300B coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB coupling
– 87300C coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB coupling
– 87301B coaxial coupler, 10 to 46 GHz, 2.92 mm (f), 10 dB coupling
– 87301D coaxial coupler, 1 to 40 GHz, 2.4 mm (f) or optional
2.92 mm (f), 13 dB coupling
– 87301E coaxial coupler, 2 to 50 GHz, 2.4 mm (f), 10 dB coupling
– 87310B 90 ° coaxial coupler, 1 to 18 GHz, SMA (f), 3 dB coupling
Equipment rack accessories
– E3663AC Rail kit
– 5063-9217 Rack mount kit, for use without handles (included with
Option 1CM)
– 5063-9205 Front handle kit
3
– 5063-9224 Rack mount kit with handles
3
– 5063-9237 Rack mount kit, for use with standard supplied handles
(included with Option 1CP)
3
1. The 500 MHz CPU board has one USB port oriented vertically and a single GPIB
port. The 1.1 GHz CPU board has four USB ports and two GPIB ports. For more
information on this subject, refer to http://na.support.keysight.com/pna/hdnum-
bers.html.
2. For the latest guide to power meters and power sensors, refer to the Keysight web
site: www.keysight.com/nd/powermeters
3. Front handles and Option 1CP (rack mount with handles) are not available for the
N5242A.
To Next Page
Loading...
