33
R Band
– R11644A standard, WR-28: 26.5 to 40 GHz.
Includes:
00914-20028 R-band termination
11644-20005 R-band short
11644-20003 R-band shim
11644-60001 R-band 10 cm straight waveguide
11644-60016 R-band 5 cm straight waveguide
– 85133F cable set (set, flexible, 2.4 mm, 53 cm each, 21 inches
each)
– R281A adapter (2.4 mm (f) to WR-28 waveguide adapter)
– R281B adapter (2.4 mm (m) to WR-28 waveguide adapter)
Q Band
– Q11644A standard, WR-22: 33 to 50 GHz.
Includes:
11644-60005 Q-band termination
11644-20004 Q-band short
11644-20001 Q-band shim
11644-60002 Q-band 10 cm straight waveguide
11644-60017 Q-band 5 cm straight waveguide
– 85133F cable set (set, flexible, 2.4 mm, 53 cm each, 21 inches
each)
– Q281A adapter (2.4 mm (f) to WR-22 waveguide adapter)
– Q281B adapter (2.4 mm (m) to WR-22 waveguide adapter)
U Band
– U11644A standard, WR-19: 40 to 60 GHz.
Includes:
11644-60006 U-band termination
11644-20004 U-band short
11644-20002 U-band shim
11644-60003 U-band 10 cm straight waveguide
11644-60018 U-band 5 cm straight waveguide
V Band
– V11644A standard, WR-15: 50 to 75 GHz.
Includes:
11644-60025 V-band termination
11644-20015 V-band short
11644-20013 V-band shim
11644-60012 V-band standard section
Verification kits
All Keysight verification kits include:
– Precision Z
0
airline or match thru
– Mismatched airline or mismatch thru
– Fixed attenuators
– Traceable measured data and uncertainties
– 85053B 300 kHz to 26.5 GHz 3.5 mm kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards.
Test procedure is provided in the service manual.
– 85055A 300 kHz to 18 GHz Type-N kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards.
Test procedure is provided in the service manual.
– 85057B 45 MHz to 50 GHz 2.4 mm kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards.
Test procedure is provided in the service manual.
– 85058V 45 MHz to 67 GHz 1.85 mm kit
Includes attenuators, match thru and mismatch thru with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards.
Test procedure is provided in the service manual.
To Next Page
Loading...
