Keysight Technologies UXA N9040B

Notice: This document contains references to Agilent.
Please note that Agilent’s Test and Measurement
business has become Keysight Technologies. For
more information, go to www.keysight.com.
Keysight X-Series Signal Analyzers
Option EMC - EMC Basic Functionality
Installation Note
Part Number: N9030-90039
Published in USA
January 2015

Keysight Technologies UXA N9040B Specifications

General

Frequency Range	2 Hz to 50 GHz
Analysis Bandwidth	Up to 1 GHz
Maximum Analysis Bandwidth	1 GHz
Resolution Bandwidth (RBW)	1 Hz to 10 MHz
Video Bandwidth (VBW)	1 Hz to 10 MHz
Input Impedance	50 Ω
Maximum Input Power	+30 dBm
TOI (Third-Order Intercept)	+20 dBm
Phase Noise	-136 dBc/Hz at 1 GHz, 10 kHz offset (typical)
Storage Temperature Range	-40 °C to 70 °C
Display	10.4 in TFT LCD

Summary

Installation Kit and Prerequisites

Products Affected and Installation Requirements

Lists affected instrument models, who can perform installation, and estimated installation times.

Software and License Prerequisites

Details required software version and license key restrictions for the option.

USB Installation Procedure

Required Contents and Tools

Lists items included in the installation kit and the necessary tools for the procedure.

Step-by-Step USB Installation Guide

Provides a sequential guide for installing the option using a USB storage device.

License Installation and Verification

License File Handling

Explains automatic and manual consumption of the license file by the signal analyzer.

Verifying Option Installation

Describes how to confirm the successful installation of the option and software.

Post-Installation and Support Information

Post-Installation Tests and Utilities

States that no specific utilities, adjustments, or performance tests are required.

Keysight Technical Support

Provides contact information and resources for technical assistance.