4 Installation Note N9020-90181
Option LNP or Option MPB Installation Kit
1. At the time of manufacture the hardware related to this option was fully
adjusted and the option performance was verified to be within its warranted
specifications. Within one year of the initial calibration date of the instrument
this option is fully calibrated with no further adjustment or verification testing.
To determine the initial calibration date, locate the original calibration
certificate that was shipped with the instrument at the time of purchase. The
Date of Calibration is printed on the original calibration certificate.
No factory test data is available for these options. If you require test data for
these options then a full calibration is required after installation of these
options. Arrangements regarding the level of calibration must be made with
the calibration provider.
2. If this instrument has been adjusted as part of a repair or calibration during its
first year, or if the instrument is more than one year old, additional
adjustments and performance verification tests are required to ensure that the
newly installed option is functioning properly. However, the completion of
these tests does not guarantee that the instrument meets all warranted
specifications.
3. The latest revision of the MXA software may be downloaded from
http://www.keysight.com/find/Xseries_software
4. These options are licensed for one instrument model/serial number
combination. The license key will only install on the designated instrument.
To Next Page
Loading...
Need help?
General
