>1.1E-8 to ≤1.1E-7 100 usec
>1.1E-7 to ≤1.1E-6 10 usec
>1.1E-6 1 usec
l Use READ? or INITiate[:IMMediate] to start the measurement.
Examples
The following example configures the instrument for pulse repetition frequency measurements on chan-
nel 3 using default parameters, makes two measurements, and then transfers the measurements to the
instrument output buffer.
CONF:FREQ:PRF (@3)
SAMP:COUN 2
READ?
Typical Response: +1.00230000000000E+003,+1.00170000000000E+003
See Also
CONFigure?
INITiate[:IMMediate]
MEASure?
READ?
SENSe:FREQuency:GATE:SOURce
SENSe:FREQuency:GATE:TIME
Keysight 53220A/53230A Programmer's Reference 123
CONFigure:FREQuency:PRF
To Next Page
Loading...
