The following example saves the current state in file MyFreqMeas.sta in the root directory of the internal
flash file system and selects it to be used at power-on.
MMEM:STOR:STAT "INT:\MyFreqMeas"
MEM:STAT:REC:SEL "INT:\MyFreqMeas"
MEM:STAT:REC:AUTO ON
See Also
MEMory:STATe:RECall:AUTO
*SAV
MEMory:STATe:RECall:SELect
286 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
