Keysight 53220A - Page 418

To Next Page

To Previous Page

l For the query form, specify "CURRent" (default) to read the dynamic subnet mask currently being used by

the instrument. Specify "STATic" to read the subnet mask currently stored in non-volatile memory within

the instrument (may not be the actual mask used by the instrument if DHCP is enabled).

l The subnet mask is stored in non-volatile memory, and does not change when power has been off, after a

Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).

l The subnet mask is set to "255.255.0.0" when the instrument is shipped from the factory or after a

SYSTem:SECurity:IMMediate command.

Return Format

The query returns the subnet mask in the form "nnn.nnn.nnn.nnn" (the quotes are also returned).

Examples

The following example sets the subnet mask.

SYST:COMM:LAN:SMAS "255.255.255.0"

SYST:COMM:LAN:UPD

The following example returns the subnet mask currently being used by the instrument.

SYST:COMM:LAN:SMAS? CURR or SYST:COMM:LAN:SMAS?

Typical Response: "255.255.0.0"

Other manuals for Keysight 53220A