Keysight 53220A - Page 474

-250, "Mass storage error: file read/write error"
-252, "Missing media"
-254, "Media full"
-256, "File or folder name not found"
-257, "File name error; invalid character in name"
-257, "File name error; relative path not allowed"
-257, "File name error; path too long"
-257, "File name error; path is a folder name"
-257, "File name error; not a folder name"
-257, "File name error; drive name missing or not recognized"
-257, "File name error; path name missing"
-257, "File name error; file or folder already exists"
-257, "File name error; folder not empty"
-257, "File name error; folder is default folder"
-257, "File name error; access denied"
-257, "File name error"
-257, "File name error; file too large"
-257, "File name error; unknown file extension"
Device-Specific Errors
-310, "System error; internal software error"
-310, "System error; software initialization failed"
-310, "System error; out of memory"
-310, "System error; failed to erase calibration data in PIC EEProm"
-310, "System error; failed to erase system information in PIC EEProm"
-310, "System error; failed to read calibration information from PIC EEProm"
-310, "System error; failed to read system information from PIC EEProm"
-310, "System error; failed to write calibration information to PIC EEProm"
-310, "System error; failed to write system data to PIC EEProm"
-310, "System error; I2C Comms Failure, PIC:Ac Power Detect"
-310, "System error; I2C Comms Failure, PIC:BatteryFuelGauge"
-310, "System error; I2C Comms Failure, PIC:BatteryInfo"
SCPI Error Messages
474 Keysight 53220A/53230A Programmer's Reference