Need help?Do you have a question about the Keysight EDU33212A and is the answer not in the manual?
General| Brand | Keysight |
|---|---|
| Model | EDU33212A |
| Category | Portable Generator |
| Language | English |
Overview of the Trueform Arbitrary Waveform Generator EDU33210 Series, its models, and key features.
Diagram and legend identifying the physical components and connectors on the instrument's front panel.
Explanation of the single-channel and dual-channel views of the instrument's front panel display.
Diagram and legend identifying the connectors and features on the instrument's rear panel.
Steps for inspecting the instrument upon receipt and verifying package contents.
Instructions on physically setting up the instrument, connecting cables, and powering it on.
Procedure for setting the output frequency of the instrument, including unit selection.
Steps to configure the output amplitude, including selecting units and specifying values.
How to configure the output termination impedance (50 Ohm or High-Z) for the instrument's channels.
Procedure to restore the instrument to its factory default settings.
Step-by-step guide to generating AM modulated waveforms on the instrument.
Instructions for configuring and outputting Frequency-Shift Keying (FSK) modulated waveforms.
Details on setting up the instrument's output parameters, including waveform selection and configuration.
Explanation of how to generate and configure pulse waveforms, including period and width.
Comprehensive guide to setting up AM and FM modulation parameters on the instrument.
Instructions for configuring and performing frequency sweeps, including sweep modes and timing.
Explanation of arbitrary waveform generation, including file import and waveform filters.
Detailed explanation of various modulation techniques supported by the instrument, like AM, FM, PM, FSK, PWM.
Discussion of common signal quality issues like harmonic distortion, phase noise, and quantization noise.
To Next Page
