Keysight X-Series Signal Generators Error Messages 35
Error Messages
List of Error Messages
rules. The instrument automatically changes the offending entry.
The IP address is invalid. Check the entry for syntax and numerical
errors and try again. Verify that the subnet mask is consistent
with this address (host bits should not be all 0s or 1s). If no
subnet is specified, verify that the address is valid with respect
to the default class netmasks: A (0x00FFFFFF), B(0x0000FFFF) or
C(0x000000FF).
-259 LAN error; The LAN parameter specified is invalid and has been
automatically been changed to a default value.
The manual IP address, subnet or default gateway parameter was
invalid. Check the entry for syntax and numerical errors and try
again.
-259 LAN error; The network has been disconnected.
-259 LAN error; The network has been reconnected.
-259 LAN error; Network initialization failed. {name}
An error occurred during network initialization. The string
contains information about the error.
-259 LAN error; Saved LAN configuration settings are missing or corrupt:
default values have been restored.
Contact your network system administrator for assistance.
-257 File name error; Already exists: {name}
To Next Page
Loading...
