Need help?Do you have a question about the Keysight N5183B MXG and is the answer not in the manual?
General| Output Impedance | 50 ohms |
|---|---|
| Amplitude Accuracy | ±0.5 dB |
| I/Q Modulation | Yes |
| Waveform Playback | Yes |
| ALC | Yes |
| Frequency Range | 9 kHz to 6 GHz |
| Modulation Types | AM, FM, Pulse |
| Harmonics | -30 dBc |
| Subharmonics | -50 dBc |
| SSB Phase Noise | Same as Phase Noise |
| Switching Speed | < 900 μs |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Lists "Out of memory" errors related to Arb file operations.
Lists "Out of memory" errors affecting system and display operations.
Lists "Out of memory" errors affecting various instrument subsystems.
Lists "Out of memory" errors related to memory allocation and file access.
Lists "Out of memory" errors concerning waveform memory and file system operations.
Lists "Out of memory" errors related to GUI display and system operations.
Lists "Out of memory" errors related to system functions and configuration.
Details errors indicating too much data for operations like IQ maps.
Lists "Too much data" errors related to IQ map generation and format limitations.
Details "Too much data" errors concerning carrier and list point limits.
Lists "Too much data" errors related to table, pulse train, and waveform list limits.
Details "Data out of range" errors for basic shapes and differential mapping.
Lists "Data out of range" errors for modulation types and channel configurations.
Details "Data out of range" errors for slot positions, frequency ranges, and list sizes.
Lists "Data out of range" errors for parameter counts and synthesizer frequency bounds.
Details "Data out of range" errors where values are clipped to limits or memory.
Lists settings conflict errors related to pulse timing and PRACH configuration.
Details settings conflict errors for modulation types, channels, and AM modes.
Lists settings conflict errors for application modes and RF blanking.
Details settings conflict errors for auto power search and clock settings.
Lists settings conflict errors for trigger sources, BCH, and bit rates.
Details settings conflict errors for block sizes and burst time values.
Lists settings conflict errors for waveform files and AWGN functionality.
Details settings conflict errors for clock rates and sequential channel activation.
Lists settings conflict errors for clipping, clock sources, and TDMA modes.
Details settings conflict errors for channelization codes and data rates.
Lists settings conflict errors for paging indicators and turbo coding configurations.
Details settings conflict errors for DCH, differential encoding, and digital data states.
Lists settings conflict errors for digital data states and Doppler shift adjustments.
Details settings conflict errors for external data sources and FFCH/OCNS conflicts.
Lists settings conflict errors related to FM/PM deviation settings.
Details settings conflict errors for FM/PM rates, frame repeat, and frequency spacing.
Lists settings conflict errors for frequency spacing and FSK frequency deviation.
Details settings conflict errors for amplitude units, DCH state, and AUX port modes.
Lists settings conflict errors for F-PDCCH, Walsh codes, and sweep settings.
Details settings conflict errors for channel codes on DPCH, OCNS, and physical channels.
Lists settings conflict errors for I/Q, Ramp Sweep, and Constant Phase settings.
Details settings conflict errors for Marker Beacon modes and Summing Ratio.
Lists settings conflict errors related to Multi-BBG Sync configurations.
Details settings conflict errors for hardware settings and waveform changes.
Lists settings conflict errors for preamble counts, time slots, and DPCH activation.
Details settings conflict errors for user files, PN9/PN15 selection, and Optimize modes.
Lists settings conflict errors for Option 403, OutOfSyncTest, and DSIM output.
Details settings conflict errors for baseband output rates and Power Meter Servo.
Lists settings conflict errors for pulse modulation, Marker Beacon, and FIR filters.
Details settings conflict errors for puncture rates and channel conflicts.
To Next Page
