Keysight N5183B MXG - File Format Errors (629) - Sequence and Waveform Data; Sequence and Waveform Data Format Errors

Keysight X-Series Signal Generators Error Messages 137
Error Messages
List of Error Messages
This is reported when an exported file contains a enumeration value
that the firmware does not recognize. The file may be from a newer
version of firmware or it may contain invalid data.
629 File format invalid; The selected {name} would be empty when exported.
The file was not exported.
This is reported when a data structure is exported, but the
resulting file would be empty.
629 File format invalid; Sequence contains an invalid single waveform
sequence.
This is reported when an invalid single waveform sequence is found
in a sequence file.
629 File format invalid; Sequence contains an invalid waveform.
This is reported when an invalid waveform is found in a sequence
file.
629 File format invalid; Unable to view/edit selected sequence file.
Single Waveform Sequence files cannot be viewed or edited at this
time. {name}
This error is reported when an single waveform sequence is selected
to and the user tried to view or edit the sequence from the front
panel. {name} is the single waveform sequence filename
629 File format invalid; The waveform file contains data that is not
formatted as expected. The file may be corrupt or contain unsupported