138 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
features. {name}
This error is reported when an invalid waveform is downloaded.
Typically, this error is reported for misformatted Aeroflex or
Rohde and Schwarz waveforms. {name} is the filename
629 File format invalid; {name}
This is reported when a file is imported and parts of it are not
understood by the instrument.
630 Arb Sequence Error; Failed to write Arb sequence to sequencer.
This is reported when there is a failure in playing the selected
sequence.
630 Arb Sequence Error; Sequence contains too many levels of sequences
containing other sequences. Maximum nesting level is 32.
This is reported when an Arb sequence contains too many levels of
sequences within sequences. If a sequence contains another
sequence, that is one level of nesting. If that second sequence
contains yet another sequence, that is a second level of nesting.
The maximum depth of sequence nesting is 32 levels.
630 Arb Sequence Error; Sequence contains too many segments.
This is reported when an Arb sequence contains too many waveform
segments. The maximum number of segments that can be added to the
sequencer is not affected by the repetition counts of individual
segments.
To Next Page
Loading...
