136 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
file size. {value} is the segment number of the first offending segment
in the sequence. {name} is the single waveform sequence filename.
629 File format invalid; Invalid single waveform file selected. Either the
sequence file is corrupt, or the segment file does not exist. Sequence
{name}.
{name} is the single waveform sequence filename.
629 File format invalid; Invalid Waveform File selected. The file must have
a minimum of 60 samples and the same number of I and Q values. {name}
This error is reported when an invalid waveform is selected to be
played in the ARB system. A valid waveform file must have the same
number of I values as Q values and must contain a minimum of 60
samples. {name} is the filename
629 File format invalid; The list file is invalid.
This is reported when an invalid list file is loaded.
629 File format invalid; PRAM file is missing bits in the last symbol. The
bits per symbol are defined by the selected modulation type. The
number of bits in the PRAM file must be a multiple of the number of
bits per symbol. The file will be used but the output is invalid.
The PRAM file is incomplete. Bits are missing that are required to
form a complete symbol. The number of bits per symbol are a
function of the modulation type in use.
629 File format invalid; Row {value}: Column {name}: Exported unknown
enumeration value {value}.
To Next Page
Loading...
