16 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
There is insufficient memory for the SMI to generate its cal data.
-321 Out of memory; The table editor cannot function properly until more
memory is available.
There is insufficient working memory available. Reduce the size of
any sweep lists and try again.
-321 Out of memory; Unable to create Application or CalTest harness
connection.
The instrument was unable to allocate resources required for the
internal application harness bridge.
-321 Out of memory; Unable to display BERT window
The instrument was unable to create part of the graphical user
interface due to an inability to allocate memory (possibly due to
fragmentation). Report this error to the service office. The
instrument is still functional.
-321 Out of memory; Unable to display format window.
The instrument was unable to create part of the graphical user
interface due to an inability to allocate memory (possibly due to
fragmentation). Report this error to service office. The instrument
is still functional.
-321 Out of memory; Unable to display protocol window.
The instrument was unable to create part of the graphical user
interface due to an inability to allocate memory (possibly due to
To Next Page
Loading...
