Keysight X-Series Signal Generators Error Messages 99
Error Messages
List of Error Messages
link. However, the values or settings allowed for these channels
vary according to the radio configuration used. Refer to the Option
201 User's and Programming Guide to determine the supported
channels by radio configuration.
-221 Settings conflict; Zeroing of the connected power sensor is not
available while a measurement is currently running
Zeroing of the connected power sensor is not available while a
measurement is currently running.
-221 Settings conflict; {name} clipped to upper limit due to Real-Time
{name} {name}.
An input value is above the maximum value allowed when a Real-Time
data transform mode is on. In some cases the maximum value is
affected by other item setting due to coupling.
-221 Settings conflict; The {name} packet#{value} subpacket#{value} should
not be overlapped by another subpacket. Check the slot position.
-221 Settings conflict; The {name} setting conflicted with the existing
{name} setting. The {name} setting has been adjusted.
The pulse specification conflicted with existing settings. To allow
the new pulse specification to function the existing settings are
modified.
-220 Parameter error
To Next Page
Loading...
