96 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
channel or decrease the number of bits of TrCHs.
-221 Settings conflict; Unsupported configuration for Pilot Gating. Pilot
Gating can only be used for the Pilot alone or in conjunction with
REACH or RCCCH.
Changing the R-PICH gating from full is only allowed in three
channel structures: R-PICH, R-PICH with the R-CCCH or R-PICH with
the R-EACH.
-221 Settings conflict; User flatness calibration is not available while a
measurement is currently running
User flatness calibration is not available while a measurement is
currently running
-221 Settings conflict; User FSK file has deviations which are incompatible
with the current symbol rate. The modulation type has been defaulted.
A frequency in the selected user FSK file exceeds the maximum
possible deviation for the current symbol rate. The default
modulation type for the mode has been selected to resolve the
conflict.
-221 Settings conflict; User FSK file has deviations which are not possible
with the options present. The modulation type has been defaulted.
A frequency in the selected user FSK file exceeds the maximum
possible deviation for the currently installed optiosn. The default
modulation type for the mode has been selected to resolve the
conflict.
To Next Page
Loading...
