Keysight X-Series Signal Generators Error Messages 149
Error Messages
List of Error Messages
The user modulation file is invalid. The file is either corrupt or
is not a modulation file.
702 Load/Store Error; Unrecognized FIR file version.
The file is either corrupt or is not a FIR file.
702 Load/Store Error; Unrecognized modulation file version.
The user modulation file has an unrecognized version. The file is
either corrupt or is not a modulation file.
702 Load/Store Error; Unrecognized shape file version.
The Burst Shape file is corrupted, or is not in the proper format.
703 Feature not supported; File '{name}' Header Parameter Real-Time AWGN
Noise Bandwidth is specified as %gHz, but it must be in the range of
1Hz to %gMHz with the currently installed options. An option upgrade
may be available.
The first {name} is the file that generated the error. The first %g is
the value of the Real-Time AWGN Noise Bandwidth as specified in the
file header. The second {value} is the upper limit of the Real-Time
AWGN Noise Bandwidth in MHz. A higher sample rate option would
have to be installed to play this waveform correctly.
703 Feature not supported; File '{name}' Header Parameter Sample Rate is
specified as %gsps, but it must be in the range of {value}sps to
{value}Msps with the currently installed options. An option upgrade
may be available.
To Next Page
Loading...
