Keysight X-Series Signal Generators Error Messages 77
Error Messages
List of Error Messages
-221 Settings conflict; Multi-BBG Sync: Ignoring triggers is only
applicable when the sync type is set to Master or Slave.
The feature to ignore triggers is only applicable when the
Multi-BBG Sync type is set to Master or Slave.
-221 Settings conflict; Multi-BBG Sync: Invalid slave position. MXG-A
slaves must be at the end of the synchronization chain. The current
slave's position has been adjusted to be before the first MXG-A slave.
Since MXG-A slaves must be at the end of the synchronization chain,
the current slave's position has been adjusted to be before the
first MXG-A slave.
-221 Settings conflict; Multi-BBG Sync: Number of MXG-A slaves cannot
exceed the total number slaves and has been lowered accordingly.
The Multi-BBG Sync number of MXG-A slaves was higher than the total
number of slaves and has been lowered accordingly.
-221 Settings conflict; Multi-BBG Sync: Slave Position value conflicted
with the total number of slaves and has been adjusted accordingly.
The Multi-BBG Sync slave position value was higher than the total
number of slaves and has been lowered accordingly.
-221 Settings conflict; Multi-BBG Sync: Sync type cannot be Slave when all
slaves in the synchronization chain are MXG-As. The number of MXG-A
slaves has been lowered by 1 in order for this slave to be
accommodated.
To Next Page
Loading...
