36 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
File or Directory already exists.
-257 File name error; Arb file already present
Aeroflex products do not allow downloading over an existing
waveform. The previous waveform must be explicitly deleted.
-257 File name error; Equalization filter file not selected.
An FIR file must be selected when turning the Equalization Filter
on.
-257 File name error; Filename cannot contain any directory information:
{name}
This error occurs when a filename with any directory information is
passed to the SCPI command RADio:ARB:GENerate:SINE. The
parameter is the bad filename.
-257 File name error; The filename specified for saving or recalling is not
valid. Note that only the STATE memory subsystem can be used with
save/recall. Name supplied: {name}
Save/Recall can only operate on the STATE memory subsystem. The
parameter is the bad filename.
-257 File name error; Invalid Filename
An invalid filename was encountered. Please refer to the user
manual for guidelines on filename format.
-257 File name error; No file has been selected for use as the PRAM file.
To Next Page
Loading...
