6 Keysight X-Series Signal Generators Error Messages
Error Messages
Error Message Format
Error Message Format
When accessing error messages through the front panel display error queue,
the error numbers, messages and descriptions are displayed on an enumerated
(“1 of N”) basis. When accessing error messages using the SCPI (remote
interface) error queue, the error numbers and the <error_description> portions
of the error query response are displayed on the host terminal.
In this guide, an explanation is generally included with each error to further
clarify its meaning. The error messages in this guide are listed numerically. In
cases where there are multiple listings for the same error number, the
messages are in alphabetical order, excluding simple words like “the” and “it”.
Error messages appear in the lower-left corner of the display as they occur.