Keysight X-Series Signal Generators Error Messages 9
Error Messages
List of Error Messages
List of Error Messages
-440 Query UNTERMINATED after indefinite response
A query was received in the same program message in which a query
requesting an indefinite response was executed (see IEEE 488.2,
6.3.7.5).
-430 Query DEADLOCKED
A SCPI output queue has filled, preventing further SCPI command
execution, and there is no more room left in the corresponding SCPI
input queue to accept a query to read from the output queue. The
system automatically discards output to correct the deadlock.
-420 Query UNTERMINATED
A condition causing an UNTERMINATED query error occurred (see
IEEE 488.2, 6.3.2.2). For example, the device was addressed to
talk and an incomplete program message was received.
-410 Query INTERRUPTED
A condition causing an INTERRUPTED query error occurred (see
IEEE 488.2, 6.3.2.7). For example, a query was followed by DAB
or GET before a response was completely sent.
-400 Query Error
This is a generic query error for devices that cannot detect
more specific errors. The code indicates only that a query
error as defined in IEE 488.2, 11.5.1.1.7 and 6.3 has occurred.
To Next Page
Loading...
Need help?
General
