Installation Note N9030-90045 3
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
Products Affected: N9030A, PXA Signal Analyzer with Options 503,
508, 513, or 526
Serial Numbers: All
Option BBA
To Be Performed By: (X) Agilent Service Center
(X) Personnel Qualified by Agilent
( ) Customer
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time
a
:
a. To ensure that this newly installed option is functioning properly, the procedure that follows includes
the requirement of performing certain adjustments and performance verification tests. However, the
completion of these tests does not guarantee that the instrument meets all advertised specifications.
Software and test equipment is required for making adjustments and for performance verification testing.
Information on how to obtain this software can be found at:
www.agilent.com/find/calibrationsoftware
While Agilent does recommend that a full calibration be performed after the installation of this upgrade,
the end user must ultimately determine whether they want this service or not. If a full calibration is
required, arrangements regarding the level of calibration must be made between the end user and the
calibration provider.
3.0 Hours
0.5 Hours
3.0 Hours
To Next Page
Loading...
Need help?
General
