Keysight N9020A User Manual

X-Series
Programmers’
Guide
Keysight X-Series Signal Analyzers
This manual provides documentation for the following analyzers:
PXA Signal Analyzer N9030A MXA Signal Analyzer N9020A
EXA Signal Analyzer N9010A CXA Signal Analyzer N9000A
MXE EMI Receiver N9038A
Notice: This document contains references to Agilent.
Please note that Agilent’s Test and Measurement business
has become Keysight Technologies. For more information,
go to www.keysight.com

Keysight N9020A Specifications

General

Brand	Keysight
Model	N9020A
Category	Measuring Instruments
Language	English

Summary

Introduction to X-Series Programming

X-Series Programming Options

Overview of various programming tools, languages, and ADEs for X-Series instruments.

IVI Drivers Overview

VISA Driver Options

Information on VISA driver architectures, including IVI-COM and IVI-C.

SCPI Programming Fundamentals

SCPI Language Basics

Introduction to SCPI language syntax, keywords, parameters, and command structure.

Finding SCPI Command Definitions

Simple SCPI Communication Methods

Techniques for establishing SCPI communication sessions, including Telnet and Connection Expert.

Improving Measurement Performance

Techniques to enhance speed and efficiency in SCPI programming.

Developing and Deploying VISA Projects

.NET VISA Programming

VISA Project Deployment Requirements

Program Samples

N9060A Spectrum Analyzer Samples

Programming samples for the N9060A Spectrum Analyzer, categorized by language.

N9064A VXA Signal Analyzer Samples