25
SCPI Programming Fundamentals
Where to find X-Series SCPI Command Definitions
List of SCPI Commands
The List of SCPI Commands is an alphabetically sorted list of all commands in the current measurement application. Each
item shown is a hyperlink to the specific Help Topic that contains the command or query. See Figure 2-3 for an example
of a List of SCPI Commands.
Figure 2-3 Example List of Commands
NOTE You can query the instrument for all supported SCPI commands in the current mode by sending
the “:SYST:HELP:HEAD?” query. For details on how to query the instrument see
“Communicating SCPI Using Telnet” on page 26.
To Next Page
Loading...
Need help?
General
